Nail Design Foil Semilac Transfer Foil White Lace

1. Prepare the nail surface as you normally would for applying UV/LED gel polish, ensuring to remove any oils.
2. Apply a base coat and cure it under a UV lamp for 2 minutes or an LED lamp for 60 seconds.
3. Use a colored UV/LED gel polish as the base. Apply it in two layers, curing each layer.
If using a non-sticky gel polish, apply the base coat in a thin layer.
4. Place pre-cut foil fragments onto the sticky layer of the colored gel polish or base coat using tweezers, and press them down with a dry brush. Leave a 2-3 mm gap around the edge of the nail. Cure under the lamp.
5. Apply a top coat to the design and cure it under a UV/LED lamp.
6. Remove any tacky residue.
If the foil isn't perfectly smooth, remove the sticky layer and buff the surface with a buffer.
7. Apply another layer of top coat and cure it under the lamp.
8. Remove any remaining tacky residue with a lint-free sponge.
Your unique "Broken Glass" effect design is ready.