Waxing Instructions

1. Open the container of wax.
2. Avoid getting water in the wax, as it will become ineffective.
3. For best results, ensure your hair is at least 3 mm long, and your skin is clean, dry, and free from irritation or any products like creams or oils.
4. Heat the wax in the microwave.
5. Carefully remove the heated wax container from the microwave, keeping it upright at all times. Check the wax temperature by applying a small amount to a paper sheet or wax strip. The ideal consistency should be similar to honey.
6. Place a wooden spatula at the bottom of the container and slowly stir the wax.
7. Before applying to your body, perform a small test. Apply a small amount to the inside of your wrist to ensure the wax is not too hot. If the temperature is comfortable, proceed with the application.
8. Using a special spatula, take a small amount of wax and apply a thin, even layer on the skin in the direction of hair growth. Leave a thicker amount of wax at both ends of the strip for easier removal.
9. Allow the wax strip to dry for a few seconds. Then, with one hand, hold the skin taut and, with the other hand, grab the end of the wax strip and quickly pull it against the direction of hair growth, keeping it parallel to the skin.
10. To soothe the skin, press down with your hand or apply a cold compress.
11. For the best results, use a 5-in-1 wipe after the procedure to remove any wax residue and to soothe, moisturize, and brighten the skin, while also slowing hair regrowth.
12. Enjoy perfectly smooth skin.

Warning:

Be extremely careful when heating the wax, as overheated wax can cause burns. In case of burns, apply cold water to the area and do not attempt to remove the wax. Seek medical attention immediately and show the packaging. For microwave use only.