Gel Polish Siller Professional Wedding Gel Polish

Product Usage Instructions

Start with a standard nail preparation: remove any previous coating, trim the cuticles, buff the nail surface, and shape the nails as desired. Next, clean the nail plate using a disinfectant and degreasing solution. If needed, apply Ultrabond, a special acid-free product, to improve adhesion of subsequent coatings to the natural nail.

Apply a thin layer of base coat for gel polish on the nail, then cure it under a UV lamp for 2 minutes or under an LED lamp for 30 seconds.

Apply two layers of colored gel polish. Remember to seal each layer (including the base and top coats). Cure the colored gel polish under an LED lamp for 30 seconds. For UV and lower-powered lamps, it is recommended to apply the colored gel polish in thin layers due to its high pigmentation. Cure under a UV lamp for 2 minutes. Note: If using highly pigmented gel polishes, ensure your UV lamp is at least 36 watts and your LED lamp is at least 9 watts, and replace bulbs as necessary.

Apply a thin layer of top coat for gel polish and cure it under an LED lamp for 90 seconds. In a UV lamp, cure for the maximum time specified on the timer.

Finish by applying cuticle oil.