Rubber Base Coat Oxxi Professional Hard Base

Perform the standard nail preparation: remove any previous polish, trim the cuticles, file the nails, buff the surface, and shape them as desired.

Clean the nail plate using a lint-free wipe. Apply a degreasing and dehydrating solution to the wipe to remove any oil, dust, or excess moisture from the nail surface.

If the nails are soft or prone to splitting, apply a special bonder to create additional adhesion and let it dry for 20 seconds.

Apply a layer of base coat for gel polish, sealing the free edge. Cure each layer for 2 minutes under a UV lamp or 30 seconds under an LED lamp.

Apply the gel polish, sealing the free edge, and cure each layer for 2 minutes under a UV lamp or 30 seconds under an LED lamp. If needed, apply a second layer of gel polish and cure it as well. Add any desired designs if necessary.

Apply a top (finish) coat, sealing the free edge of the nail, and dry it according to the lamp's power in a UV or LED lamp.

If a top coat with a sticky layer was used, remove the sticky residue with a lint-free wipe soaked in a special cleanser designed for this purpose.