Microdermabrasion Device Lancer Pro Polish Microdermabrasion Device

Your PRO POLISH device comes ready to use with a diamond tip already attached for facial treatment. This tip is designed for use on the face, hands, and small areas of the body. To change tips: Ensure the device is unplugged, then simply twist to remove and replace the tip. Always check that a new filter is in place before use.
Gently run your fingertip around the edge of the diamond tip to make sure there are no sharp or abrasive areas. If there are, do not use the device.
Adjust the neck of the device to the desired position by pressing the button on the top of the device, then plug it into an A/C outlet.
Exfoliating with PRO POLISH:
Start with clean, dry skin—free from oils and makeup.
Locate the power switch and press it once. The device will start suction at a low level. This is a great setting for your first microdermabrasion session. Press the button again to increase suction to medium, and again for high level. On the fourth press, the device will turn off.
Ready to glow? Firmly press the treatment area against clean, dry skin. For instance, if you want to start with the cheek, pull the skin tightly towards the ear with one hand. Position the device at your desired setting above the jawline and move it upward in short strokes. Lift the device off the skin at the top and place it again above the jawline, moving upwards, making no more than 2-3 short passes over the same area. When treating larger body areas during a session, periodically check the filter for replacement.

Unplug the device after use. Once disconnected, remove and wash the tip with your preferred facial soap using a soft brush (like a toothbrush), then rinse and allow it to fully dry before the next use. Replace the filter after each use.
It is recommended to use the device 1-2 times per week with a 3-day interval.
Make sure to read the included instructions thoroughly before using PRO POLISH.
First-time PRO POLISH users:
If you are using PRO POLISH for the first time, we suggest practicing on your hand before using it on your face. To do this, clench your hand into a fist and bend it downward. Notice how the skin on your fist tightens? Set the device to the lowest suction setting and make short, upward movements from the knuckles to the wrist. Once you feel comfortable using the device, begin your session on the lowest suction setting.