Green Tea and Lime Perfume for Catalytic Lamps Ambientair Lacrosse Green Tea & Lime Lamp Fragrance

1. Choose a location for the lamp: Ensure it is a flat and stable surface, away from heat sources, and out of reach of children and pets.

2. Using a funnel, fill the lamp body two-thirds full with a liquid suitable for catalytic lamps. The liquid can be neutral or scented, and you can mix them to achieve a lower scent intensity. After filling, clean the exterior of the lamp and the surrounding area to remove any liquid residue.

3. Insert the burner, ensuring the wick is in contact with the liquid and the stone is properly positioned above the metal base of the lamp. If this is the first use, cover the stone with the cap (to prevent the scent from evaporating) and let the wick soak for 20 minutes.

4. Remove the cap and use a lighter to ignite the burner. Let the flame burn for two minutes. The flame should reach about 7 to 10 cm (3 to 4 inches) and will shrink as the burner heats up. Do not leave the lamp unattended during these two minutes and never touch the stone while it is burning.

5. Blow out the flame and, once it is extinguished, cover the stone with the protective crown. The stone will be hot, so avoid touching it. Your lamp is now operational.

6. Allow the lamp to purify the air for about 20 minutes in a room of approximately 10 square meters.

7. To stop the lamp, carefully remove the crown, as it may be warm, and cover the hot stone with the metal cap to prevent further combustion and evaporation of the scent.

8. For future use, leave the cap and crown on the metal base of the lamp to keep everything ready for the next time.